Google translator translates this web page into the language of your country though layout is a little crumble.
Chinese site is provided.

Technovision TOP > Products > Model FM-6648
Model FM-6648

Model FM-664 series

This model was developed for both pre-cut and normal tape.
The industry's first universal wafer mounter, it not only serves as a dedicated wafer mounter for pre-cut or normal tape, but can also be adapted to the following uses.


Mode FM-6643 : 300mm(12 inch) semi-automatic wafer mounter
Mode FM-6648 : 200mm( 8 inch) semi-automatic wafer mounter

Features
  
Features
1
User-settable parameters, including lamination pressure, speed, and temperature
2
Variable lamination pitch for normal tape
3
Tension-free lamination
4
Bubble-free lamination
5
Can be customized for non-contact surface lamination
6
Equipped with measures against static electricity
7
Compact, light-weight, and small-footprint type
Uses
  
Uses
1
For dicing process with both pre-cut and normal tape
2
For dicing process with pre-cut tape only
3
For dicing process with normal tape only
4
For precut two-layered tape (DAF with dicing tape)
5
For normal two-layered tape (DAF with dicing tape)
6
For single DAF tape
7
For back grind (BG) film
8
For front-protection film
9
For rear-protection film
10
For functional film (resist film, CSP film sealings, underfill film, and others)
FM-6648
Model FM-6648
FM-6643
Model FM-6643
Operation movie 

Technovision | Semiconductor Manufacturing, Cleaning System, Post-process

Copyright © 2000-2013 Technovision, Inc. All Rights Reserved.